Microscopes – the mobile and handy with the photo-digital camera small, lightweight, handy and perfect finish: the PEAK microscope of series 2034 impresses with its easy handling. Simply put the microscope on the measuring field, focus – ready. The area to be examined from all sides is visible thanks to the clear acrylic base. This way, you can easily find the measuring point. The focusing is done by the co-axial rotation of the tube. Lenses from 2 x up 30-fold magnification available are for the standard microscope. This results in connection with the 10 x eyepiece magnifications of 20 x to 300-fach.

If additional lenses are used only for Visual inspection, you need no other eyepieces. The eyepieces for various magnifications contain the corresponding divisions of 0.1 mm to 0.001 mm. These are only necessary when using additional lenses should also be measured. The side lighting allows measurements on dark surfaces or in darkened rooms. For the operation are two 1.5 volt AA batteries required. The microscope in a padded carrier will be delivered.

It offers safe transport space for more four lenses, which are available as accessories. The microscopes 2034 receive higher stability through the use of MKH tripod. It is an indispensable accessory for safe controls on rollers. Also, in conjunction with a digital camera the use of MKH tripod is useful. With the help of adapter rings between microscope eyepiece and the camera, the image with a digital photo camera can be record (Sony Cybershot W300). Via adapter cable between camera and computer interface enters the picture in the laptop or the PC. So then extensive checks and detailed documentation on site can be created. Just for referees who need to create shots of damaged areas in difficult accessible areas, it is a great advantage if the recordings are recorded with a small and mobile unit and later transferred to the laptop. Other versions are the stand microscopes Series 2054 EIM with reading display and 2054 CIL with additional coaxial illumination.